This sensor is ideal for applications requiring high reliability, NO maintenance, ruggedness, ice-free operation or portability.
- No Moving Parts
- No Periodic Maintenance
- Digital and Analog Outputs
- Automatic North Alignment
- Ice-Free Operation (Optional)
- Two Year Warranty
- Field configurable
Climatronics’ Sonimometer™ (sonic anemometer) (P/N 102779) is designed for ambient wind sensing in harsh environment industrial applications as a direct replacement for conventional mechanical propeller and cup anemometers, both in terms of performance and cost. It requires no periodic maintenance or calibration.
The Sonimometer™ operates on the principle of the measurement of the speed of sound in air. All electronics utilize the latest solid state surface mount technology, conserving power, size, and weight, with a power consumption of less than 0.5W for the unheated version.
The Sonimometer™ measures only 4 inches in diameter and 8 inches high, and the body is slender and aerodynamic to assure that minimum turbulence is introduced into the measured air stream. Measurement interference is further reduced by the transducers being located out of the measurement air stream.
This also serves to increase the reliability and longevity of the sensor as dust, debris, snow, rain, etc, will not impact directly on the transducers.
Standard digital outputs are RS-232C, RS-485 and SDI-12 which are easily interfaced to any of Climatronics’ or other commonly available data acquisition systems. A variety of standard analog outputs are also available. With the flux-gate compass, the wind direction output is automatically referenced to magnetic north. The small size and surface area of this anemometer allows it to be kept ice free even at relatively low power levels. The heated version of this anemometer, P/N 102729, includes the heating elements, which are factory-installed. The heater control box, P/N 102626, is ordered separately.
The Sonimometer™ is now totally field configurable through a very user friendly, software interface, which is accessed through the serial port.
PERFORMANCE P/N 102779 OR 102729
|Range||0 to 70 m/s (0 to 157 mph)|
|Accuracy*||±0.5 m/s (1.1 mph) or 5%|
|Repeatability||±0.2 m/s (0.45 mph) or 5%|
|Range||0° to 360°|
|Accuracy*||±5° (Including compass error of ±2°)|
|Measurement Format||Two orthogonal axes, North/South and East/West|
|Measurement Rate||2 Hz each axis|
|Operating Frequency||40 KHz|
|Signal Output||DIGITAL: RS-232C, 100 ft @ 9600 BPS &
50 ft @ 19.2 KBPS RS-485, 4000 ft @
9600 BPS and SDI-12, 200 ft @1200 BPS
ANALOG: 0 -1, 0-2.5, 0-5 or 1-5 VDC,
over the measurement range selected.
|Power Requirements||Sensor: 9 – 36 VDC @ 35mA nominal, option
dependent; Heater 115 VAC/60 Hz, 100W
|Mean Time Between Failures||80,000 hours|
|Temperature||-40°C to 60°C (-40°F to 140°F)|
|Humidity||0 to 100%|
|Weight||1.00 kg (2.2 lbs)|
|Size||203.2 mm (8.0 in) high by
101.6 mm (4.0 in) dia
|Mounting||P/N 102779 = 102778 mount
P/N 102729 = 102286 mount
to ¾ in IPS (1.05” or 26mm
OD) vertical pipe stub.
|Weight||1.3 kg (3.0 lbs)|
|Volume||0.012 m3 (0.44 ft3|
Options Configuration Guide
Contact the factory for options configuration for P/N 102729 heated version
|Base Part Number||1102779|
|Std. Digital Outputs||RS-232C, RS-422/485 and SDI-12|
|Analog Output Options||None A0
0 – 1 Volt A1
0 – 5 Volt A2
0 – 2.5 Volt A3
1 – 5 Volt A4
|Digital Output Options||Standard D0
485 Tracker D1
Typical complete part number: 102779-A0-D0
* This accuracy is maintained when the sensor is within +/- 10 degrees of vertical